Lighting Products

You always get FREE SHIPPING at Flight Widgets

Navigation light kit

Baseplate, lens and dual BA-9 sockets for use as a navigation light on Experimental aircraft. Includes a knockout panel for installing a strobe. Sold in pairs. 10-32 screws included. Bulbs not included

Beacon Baseplate and lens kit

$59.99

Add to Cart

Baseplate, lens and instructions for use on the top or bottom of an exprimental aircraft to be used as a recognition beacon

Cockpit Lighting S-100, complete system

$229.00

Add to Cart

This system includes: (1) 40mm X 50mm control panel (black with white inlay) with power switch, color selector and Intensity adjustment knob. (1) LCS5 system controller. (1) 36" harness. (1) 24" Red and White LED strip with adhesive backing and (1) red and white dome light. Options: add additional 24" Red and White LED strip with adhesive backing or additional dome lights. (sold separately)

FREE SHIPPING

Cockpit Lighting R-200, complete system

$249.00

Add to Cart

This system includes: (1) 72mm round control panel made to fit a standard 2 1/4" instrument hole. (1) control panel (black with white inlay) with power switch, color selector and Intensity adjustment knob. (1) LCS5 system controller. (1) 36" harness. (1) 24" Red and White LED strip with adhesive backing and (1) red and white dome light. Options: add additional 24" Red and White LED strip with adhesive backing or additional dome lights. (sold separately)

FREE SHIPPING

High / Low Voltage Alarm Sensor

$69.00

Add to Cart

If your looking for a Aircraft Voltage Alarm Sensor for your electrical system there's no need to look any further than Flightwidgets HLA-1A. This is a new product just released. Easy installation anywhere behind your panel and ties into your main DC buss. It has a high Voltage output set to 16VDC that will drive an LED or Flightwidgets Annunciator panels. The low voltage output setting is preset to 11 VDC but can be adjusted by the user and also drives an LED or Flightwidgets Annunciator panels . Transferable 1 Year limited warranty. These sensors are built as they are ordered so please allow 2-3 weeks for delivery. Thanks

LED Controller Module LC5

$69.00

Add to Cart

The heart of our lighting systems.

FREE SHIPPING

Dimmable Dome Light

$39.00

Add to Cart

This dome light has both red and white LEDS. Made to be used with our S-100 and R-200 lighting systems. Additional Dome lights may be added up to 2 total. PN: DDL01

Press YELLOW button to Purchase a "24" Red & White LED strip" using PAYPAL

Press BLUE button to Purchase a "24" Red & White LED strip" using Credit Card

24" Red & White LED strip

$18.00

Add to Cart

24" LED expansion strip. These can be shortened during installation if needed. ( for use with S-100 and R-200 systems with LC5 controller)

FREE SHIPPING

24 month limited warranty

Press YELLOW button to Purchase a "Controls only for S-100 and R-200 system, pre-wired" using PAYPAL

Press BLUE button to Purchase a "Controls only for S-100 and R-200 system, pre-wired" using Credit Card

Controls only for S-100 and R-200 system, pre-wired

$49.00

Add to Cart

This is the same switch and dimmer that comes on the LC1R and LC1S panels but without the panels. Length is 8". Useful if you want to mount your switches in your instrument panel. pre-wired

FREE SHIPPING

Press YELLOW button to Purchase a "Interconnect Harness for S-100 and R-200 system" using PAYPAL

Press BLUE button to Purchase a "Interconnect Harness for S-100 and R-200 system" using Credit Card

Interconnect Harness for S-100 and R-200 system

$49.00

Add to Cart

Pre-wired harness ready to install, 36" Length

FREE SHIPPING

Press YELLOW button to Purchase a "Interconnect Harness Kit for S-100 and R-200 system" using PAYPAL

Press BLUE button to Purchase a "Interconnect Harness Kit for S-100 and R-200 system" using Credit Card

Interconnect Harness Kit for S-100 and R-200 system

$19.00

Add to Cart

Mount your LC5 controller anywhere! Comes with harness schematic and connectors for the Do-It-Yourself types

FREE SHIPPING

Press YELLOW button to Purchase a "Old Style Instrument panel LED lighting Kit" using PAYPAL

Press BLUE button to Purchase a "Old Style Instrument panel LED lighting Kit" using Credit Card

Old Style Instrument panel LED lighting Kit

$55.99

Add to Cart

If you're looking for old styling or that military look then these lights are for you. This kit includes (6) RED LED panel lights.

Voltage is 12 VDC. Current draw is 40 ma each. 120 degree beamwidth. Light output is 6 Lumens. Wiring pigtail is 12". Bolt hole size is .250. This unit can be used with our LC5 controller. Spacing across panel should be 12". PN: IL-11BKIT

Press YELLOW button to Purchase a "Old Style Instrument panel LED light" using PAYPAL

Press BLUE button to Purchase a "Old Style Instrument panel LED light" using Credit Card

Old Style Instrument panel LED light

$9.99

Add to Cart

If you're looking for old styling or that military look then these lights are for you. This is (1) RED LED panel light. Voltage is 12 VDC. Current draw is 40 ma each. 120 degree beamwidth. Light output is 6 Lumens. Wiring pigtail is 12". Bolt hole size is .250. This unit can be used with our LC5 controller. PN: IL-11B

Press YELLOW button to Purchase a "RED Instrument and Map light" using PAYPAL

Press BLUE button to Purchase a "RED Instrument and Map light" using Credit Card

RED Instrument and Map light

$49.99

Add to Cart

These versatile LED cockpit lights throw out a ton of light and one is enough to illuminate your entire instrument panel. They can be re-positioned to illuminate your charts with their 60 degrees of angle adjustment while being able to rotate a full 360 degrees. Come with one white and 2 red lenses, 30 deg and 60 deg. Also comes with an adjustable hood. These lights are NON-dimmable stand alone units and are not meant to be used with our cockpit lighting systems or their components. PN: RIL01

15" Red LED Gooseneck Maplight

$0.00

Add to Cart

This high quality all metal 5 LED light connects via a standad BNC connector (included). 12VDC. PN: GN01

Battery Powered Red LED single gooseneck Clip light

$24.95

Add to Cart

This light features 4 high intensity LED lamps with a Red lens. The gooseneck is 9"long and features a 3 position push button switch on the lamp head for low intensity, high intensity and Off. Uses 3 AAA batteries or DC power supply (sold separately) PN: GNCL01

Battery powered DUAL gooseneck Red LED clip on light

$34.95

Add to Cart

This light features a DUAL goosneck with 2 high intensity LED lamps each with a Red lens. Each gooseneck is 9"long and features a 3 position push button switch on the lamp head for low intensity, high intensity and Off. Uses 3 AAA batteries or DC power supply (sold separately) PN: GNCL02

GNCL01 and GNCL02 power supply

$14.95

Add to Cart

This power supply is configures to run as many as 4 of the battery powered gooseneck clip on lamps. Power supply, schematic and one 4mm DC power plug included. Additional 4mm power plugs sold separately. PN: GNPS01